Table of Contents
Advertisement
Polaroid PROZ500PR003
circumstances, this key functions as what it says in the bottom left coner in
the display.
• Navigation key: Navigation key can be set different shortcut function in
the standby state.
• Right key: Selection key, to select the function as what it says in the bottom right
coner in the display.
• Hang up key: end the call and dismiss a call, Click this button
shutdown / boot-strap; In other circumstances, this standbybutton to return
to the general interface.
• ALT keys: In edit mode, press this key to input letters printed above on
the keypads.
• Shift key: In edit mode, press this key to switch between different input
methods.
• Delete key: Input state, the "DEL " button delete the current
character.
• Return key: Go to the next line in edit mode.
• Sym key: In edit mode, press "sym" key to enter "Select symbol" Interface.
• FM key: Press "FM" key in standby status to enter FM mode.
2.3 Battery
The battery was charged about 50% electrical power, it is available to use
immediately after the phone is unpacked. For the first three times, the power
must be run out of, and then the battery should be fully charged to use, thus
the battery can supply in the best service condition.
1. Remove and install the battery
Dismantle by following procedures:
• Remove cover of battery of the mobile phone.
• Lift the bottom of battery upward and remove it from battery box.
Warning: power off before removing the battery. When the phone is
power on or connected to external power supply, it is forbidden to
remove the battery, or the SIM card and phone would be damaged.
• install by following procedures:
Align the metal contact point of battery with that of battery box, and snap the
battery in the box and press the battery downward until it is installed well.
2. Charge
• Insert the charger on the supply.
• Connect the right end of charger to the side port of mobile phone.
• After connection, the screen of mobile phone displays "The charger was connec-
ted" , and it is charging, the battery icon shows the process of charge; if the phone
was power off, the screen will show the process of charge dynamically.
• In low battery state, overusing the mobile phone will cause low voltage,
and the phone enter low voltage lock mode and can't power on normally.
6
Advertisement
Table of Contents
