Before First Use; Inserting The Staples - Westfalia 690 Instruction Manual

Before first Use

Remove the unit and the accessory out of the packaging. Keep packaging
materials out of reach of children. There is risk of suffocation!

Inserting the Staples

This stapler can drive staples 15 – 30 mm long and 6.1 mm wide and T-Nails
15 – 30 mm long. You can find a more precise list on page 10.
Please keep in mind that staples and nails must be suited to the material they
are used in. The harder the material is, the shorter the staples or nails should
be.
1. Unplug the unit before inserting staples.
2. Unlock the lock piece (3) and lift it out of the unit
complete with spring, guide bar and follower (4).
3. Slide a clip of staples between the guide bars of
the channel.
4. Slide the follower (4) back into the channel and
lock the lock piece back in place.
Operation
8