Chapter 2 System Setting; Interface Type Selection - Lindy 20789 Manual

Chapter 2 System setting

2.1 Interface type selection

This type of bar code reader can support 3 kinds of
interface ˜User can reset according to their needs ˜It
is to be noted that the bar code reader can only read
data into the mainframe if the on-line access to the
interface is consistent with the settings.
USB protocol used HID type of keyboard ¨ so
related-settings of keyboard also apply to USB
interface ˜
If applying to other interface lines upon the USB
interface has set ¨feature setting still can be carried
on ¨but not the transmission of data ¨or else it will
result to shut down ˜
If the interface from other settings applied to USB
interface ¨procedures need to be restarted when the
set ended ¨scanner should re-plug the electric ˜
Prior to scan, it is critical to ensure that the
equipment is complete ˜
Set begin
Option
Keyboard (default)
RS-232
USB
Set end
Item
Interface selection
- 4 -