Table of Contents
Advertisement
2.4 String (character) setting
Prefix ˆsuffix string setting A max. of 10 ASCII
characters could be added before or after the bar code
data ˜No action can be done if it is set to 0.
Format as follow
Prefix
string
Bar code data
character
Steps for adding Prefix/ Suffix to all bar code
symbols
Scan start set up and set prefix string bar code ˜
See table of ASCII code ¨find the prefix / suffix
ASCII value ˜
Scan the ASCII value of the bar code through
appendix ˜
Bar code scan ends ˜
Bar code scan setting ends ˜
Insert the G1/G2 group of characters Each group can
add a max. of 10 ASCII, characters can't be inserted
when it is set to 0 ˜
Steps in inserting characters
Scan set up start and insert character barcode to G1 ˜
Check the table of ASC11 ¨look for the ASCII value
of the character ˜
Scan the bar code of ASCII value through the
appendix ˜
Scan the end bar code through the appendix ˜
Repeat the same steps for inserting the G2 group
characters ˜
Scan end set up bar code.
Insert character location to G1/G2 group Choose a
group of character and insert to the location of bar
code ¨when it is set to 0 ¨although you do not set
up to group of 0 characters ¨ still can not be
inserted to bar code data ˜
Scan start set up and insert character location bar
code to G1 ˜
Suffix
string
character
- 18 -
Advertisement
Table of Contents
