Start Measuring; First Measurement; Daily Measurement - Kinetik BCA1 User Manual

Start Measuring

First Measurement

• Position scale on a firm flat surface.
• Press set key.
• While the user number of the latest measurement is flashing, select your user number by
pressing or key. After 3s, the selected number is locked, the scale shows zero
reading.
(Note: When the user number is flashing, if you press set key again, it will enter the setting
mode, after all the settings are finished, it will display zero reading. )
STEP 1: Step on the platform barefooted
when the LCD displays "0.0".
STEP 2: Stand still and the weight data will be locked with the unit stop flashing. Keep full
contact with the electrodes until the LCD stop displaying moving "o".
STEP 3: The measurement results will be displayed followed by BMI, Body Fat, Total
Body Water, Muscle Mass and Bone Mass. The data will be displayed twice and
then turn off.
* If it fails to complete the analysis, the LCD will only display the weight data.
(To find out the solutions, please refer to Troubleshooting for more details.)

Daily Measurement

With original SENSE ON patent technology, BCA1 will switch on as you step on the
platform barefooted.
Stand still and keep full contact with the electrodes until the LCD stops displaying
moving "o".
After the weight is locked, the system will automatically identify the possible User ID
with most similar history records.
If it identifies one user, it will skip the step about user selection, then display the BMI,
Body Fat, Total Body Water, Muscle Mass and Bone Mass data sequentially
twice and turn off.
Start Measuring