Select Measurement Unit; Initialising Your Scale; Weight Only Operation - Kinetik BCA1 User Manual

Initial Start-Up
4. Setting Age
1. After confirming the Height, the system will divert to Age setting.
2. As pictured below, the digits "30" blinks. The user may press the function key
to increase or decrease the numerical.
3. You may press and hold the function key
4. Press "set" key to confirm Age.
5. After confirming the Age, the LCD will display "0.0kg", then you can start measuring.
6. Repeat procedure for a second user, or to change user details.
Note: To update or overwrite the memorised data, follow the same procedure,
making changes as required.

Select Measurement Unit

With batteries correctly installed, press "UNIT" button in the back of the scale to select
measurement unit. The default measurement unit is "kg". You may press "UNIT" button to
choose among kilogram, stone and pound.
or
or to quickly change the numerical.

Initialising Your Scale

1. Press the platform centre and remove your foot.
2. "0.0" will be displayed.
3. The scale will switch off and is now ready for use.
This initialisation process must be repeated if the scale is moved.
At all other times step straight on the scale.

Weight Only Operation

Your Kinetik Body Analyser Scales will operate as a conventional
weight - reading scale. No special programming steps are required.
Once the scale is initialized, as previously described, you may simply step on
the scale to measure your current weight. For only weight reading.
1. Position the scale on a flat, hard surface. Carpeted or uneven floors may
affect accuracy.
2. Step onto the scale platform and remain still while the scale computes your weight.
3. The scale will display your weight value.
4. The scale will automatically turn off after a few seconds.
Initial Start-Up