(14)
Fig. 7&8
Schémas 7 et 8
CONTINUOUS DRAINAGE
VIDANGE CONTINUE
To use the unit in dehumidifying mode, you will need to settle continuous drainage as follow.
Pour u�liser l'unité en mode de déshumidifica�on, vous devez régler la vidange con�nue comme suit.
Note: The drain hose and connector are not included.
You will need a tap connector (20/27 or 3/4" thread), which can be easily obtained from DIY stores.
Remarque : Le tuyau de vidange et le raccord ne sont pas inclus.
Vous aurez besoin d'un nez de robinet ou d'un raccord pour robinet (filetage 20/27 ou 3/4''), trouvable
1. Unscrew drain cover (a) from drainage outlet n°11.
facilement dans les magasins de bricolage.
2. Remove the rubber stopper (b).
3. Screw the connector (d) onto the thread (c).
1. Re�rez le cache de vidange (a) de la sor�e d'évacua�on n° 11.
4. Connect a hose (e) to the chosen connector.
2. Re�rez le bouchon en caoutchouc (b).
3. Vissez le raccord (d) sur le filetage (c).
The water can now be continuously drained through the hose into a floor drain or sink.
4. Raccordez un tuyau (e) au raccord choisi.
(c)
MAX 100 cm
(16)
MIN 35 cm
(b)
(c)
(c)
(16)
(16)
(a)
(d)
(d)
17
EN
(16)
(e)
(e)