Advertisement
Stream music to a Bang & Olufsen radio or TV from:
• Smartphones
• Tablets
• PC
• Other Bluetooth sources
Installation
The OneRemote Bluetooth device can operate both as a transmitter or a receiver. The color of
the LED lamp indicates whether it is programmed as a receiver or transmitter.
1. BLUE indicates that the Bluetooth module is in Receiving mode.
2. RED indicates that the Bluetooth module is in Transmitting mode.
When using it for streaming TO a Bang & Olufsen device from a Smartphone, TV or other
device, it must be in Receiving mode. Receiving sound from a device to be played via the Bang
& Olufsen Radio or TV.
When inserting the Bluetooth receiver into the Power Supply, the LED will light up in either
Blue or Red, indicating the current mode. If the LED is flashing, it indicates that it is waiting to
be paired with the Smartphone or other transmitting device. Once it has been paired, the LED
will stop flashing.
If the Bluetooth receiver is not in Receiving mode (BLUE) it must be programmed. Changing
mode is very easy. Simply insert the Bluetooth device into the Power Supply and see if the LED
has the right color BLUE. If not, take out the Bluetooth device and insert it again. This might
need to be repeated, depending of the current setting of the Bluetooth device.
On the transmitting device, look for the pairing name: KN323
www.oneremote.dk
2
Advertisement
