Network Configuration: Activate Wi-Fi - AVIQ Mk2 Quick User Manual

Network configuration: activate Wi-Fi

If you wish to connect your AVIQ TV decoder to your modem using Wi-Fi, follow
these steps:
Press the

decoder
Using the arrows, select

Select Internet access

Select Wireless

Once Wi-Fi mode has been activated, your TV decoder will automatically search
for available wireless networks and indicate if they are protected.
Select your modem/router's wireless network

Enter your Wi-Fi code (located on the label on the back of your modem)

using the TV decoder remote control, and press
Your wireless network is now connected

Press the TV button on your remote control. You can now watch TV.
Note:
You cannot use the wired Ethernet connection and Wi-Fi at the same time; one
will always be deactivated automatically when the other is activated.
MENU button on the remote control supplied with your TV
Settings
and press the
and press OK.
and press the OK
OK button
Connect
button
93