Table of Contents
Advertisement
Available languages
Available languages
Connections
AUX socket
a,
Use a RCA to RCA audio cable (not included) to connect the TV's audio
output sockets to the AUX (R L) sockets on the unit.
b,
Use a RCA to 3.5mm audio cable (not included) to connect the audio
player's headphone socket to the AUX (R L) sockets on the unit.
Connect the (DAB/FM) Aerial
Connect one end of the aerial (included) to the ANT. socket at the rear of
the unit. Then position the aerial to obtain optimum reception.
IMPORTANT:
• You may need to adjust the position of the aerial when tuning the radio
to receive the strongest signal.
• Never leave the aerial where it can be pulled by children.
EU
UK
Connect to Power
• Before connecting the AC power cord, ensure you have completed all
other connections.
• Risk of product damage! Ensure that the power supply voltage corres-
ponds to the voltage printed on the back or the underside of the unit.
Connect the mains cable to the AC~ Socket of the unit and then into a
mains socket.
Set the Clock
Clock synchronization
In STANDBY mode, press and hold the /MONO/STEREO button on the
remote control to synchronize the clock. Press the
remote control or on the unit to switch the clock synchronization modes:
• RDS Only synchronize with the RDS radio station.
• OFF Turn off the clock synchronization function, clock needs to be
adjusted manually.
Then press the
button on the unit or the
control to confi rm.
L
R
A
B
/
buttons on the
/SCAN on the remote
--:--
Manual Setting the clock
Manual Setting the clock can only be done in STANDBY mode.
1.
In STANDBY mode, press and hold the CLOCK button on the remote
control or on the unit until the hour digits are fl ashing.
– Press the
button on the unit or the
on the remote control to select 12/24 hour format.
2.
Press the
/
buttons on the remote control or on the unit to
adjust the hour digits while fl ashing, then press CLOCK button on the
remote control to confi rm, then the minute digits will fl ash.
3.
Press the
/
buttons on the remote control or on the unit to
adjust the minute digits while fl ashing, then press the CLOCK button
on the remote control to confi rm. Each activated state will be cleared
if any buttons are not pressed within 15 seconds.
Set the Alarm Clock Timer
The clock time must be set to the current time and for the timer to operate
correctly
1.
In STANDBY mode, press and hold the TIMER/SLEEP button on the
remote control until the hour digits fl ash on the display.
2.
Press the
/
buttons on the remote control or on the unit to
adjust the hour digits, and then press the TIMER/SLEEP button on the
remote control to confi rm, the minute digits will fl ash on the display.
3.
Press the
/
buttons on the remote control or on the unit to
adjust the minute digits, and then press the TIMER/SLEEP button on
the remote control to confi rm, the mode will fl ash on the display.
4.
Press the
/
buttons on the remote control or on the unit to
select:
– FM (to wake to your selected FM Radio Station)
– DAB (to wake to your selected DAB Radio Station)
– BUZZER (to wake to a buzzer sound)
– DISC (to wake to your DISC music)
– USB (to wake to your USB music)
5.
Press the TIMER/SLEEP button on the remote control to confi rm, the
display will show the volume level.
6.
Press the
/
buttons on the remote control or on the unit to
adjust the volume, and then press the TIMER/SLEEP button on the
remote control to confi rm, the display will show the current time and "
" will appear from the display.
Tips:
• Each set state will be cleared if any button is not pressed within 15
seconds.
• The FM tuner timer will show the last tuned station.
Activate and Deactivate the Alarm Timer
• Press the TIMER/SLEEP button on the remote control to view the alarm
settings or activate the alarm.
• To deactivate the alarm, press the TIMER/SLEEP two times. The " " will
disappear from the display on the front of the unit.
• To activate the alarm, press the TIMER/SLEEP two times. The " " will
show from the display on the front of the unit.
Stop Alarm Ring
• When the alarm rings, press the power button on the remote control or
on the unit. The alarm stops but the alarm settings remain.
EN
00:00
/SCAN button
Advertisement
Table of Contents
