HEPRO ARCTIC 17 User Manual page 35

5.3 Adjusting seat depth
The seat cushion is attached to the
seat plate with Velcro and is adjustable
in depth. The cushion is detachable and
can be moved to optimise comfort.
The seat plate is attached to the seat
frame with two bolts and associated
wing nuts. The seat plate has three
holes for regulation. By default, the
disc is attached to the center hole.
Combining the position of the seat
plate and seat cushion achieves the
optimal seat depth for the user.
5.4 Adjustment of seat angle
By adjusting the wheel under the seat,
you can move the angle of the seat to
the desired position. There is a wheel
on each side. Before operating the
wheel, the wing nuts securing the seat
plate must be loosened slightly and
then tightened again when the desired
position is reached.
HEPRO
User Manual | Side 35