Office Star Products SPACE SEATING 2787 Operating Instructions

étape 1 étape 2
12
2 X5
1
8
étape 4 étape 5
12
10
X3
4
11
6
1
enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier les
quantités des pièces.
étape 1 Insérer les cinq roulettes (2) dans la base (1). Pousser fermement jusqu'à ce que les roulettes (2) s'encliquettent.
étape 2 Fixez les bras (7L & 7R) au coussin du siège (5) en utilisant trois vis pour les bras (8) pour chaque bras.
serreZ tOutes les Vis COMMe il Faut.
étape 3 Fixez le Plateau Du Siége (4) au coussin du siège (5) avec les flèches vers la partie avant du fauteuil en utilisant quatre Vis pour la plaque du
siège (9) serreZ tOutes les Quatre Vis COMMe il Faut.
étape 4 Fixez le support du dossier du siège (11) à la partie arrière du Plateau Du Siége (4) en utilisant trois Vis du
support du dossier (10), serreZ tOutes les Vis COMMe il Faut.
étape 5 Insérer le vérin pneumatique (3) dans la base (1), Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser vers le bas.
attentiOn: aVant d'utiliser le Fauteuil, s'assurer d'aVOir serré COMplÈteMent tOutes les Vis.
2787 / 27876
Fauteuil président Matrix
instruCtiOns de MOntaGe
étape 3
8
X3
12
X3
9
7L
7R
5
part
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique . . . . . . . . . . . . 1
4. Plateau Du Siége . . . . . . . . . . . . . . 1
5. Coussin du siège . . . . . . . . . . . . . . 1
6. Assemblée du dossier . . . . . . . . . . 1
7. Bras (7L & 7R) . . . . . . . . . . . . . . . . 2
8. Vis pour les bras . . . . . . . . . . . . . . 6
3
9. Vis pour la plaque du siège . . . . . . 4
10. Vis du support du dossier . . . . . . 3
11. Support du dossier du siège
(préinstallé) . . . . . . . . . . . . . . . . . . . . 1
12. Clé Allen . . . . . . . . . . . . . . . . . . . 1
X4
1
4
5
2787
QtY
LIMITED WARRANTY
SPACE ® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters .
• 3 Years on upholstery fabric and foam against wear and deterioration .
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use .
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by
persons weighing 250 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration,
accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not
cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user
assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five year warranty on
all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
To make a warranty claim, contact Parts Department via e-mail parts@officestar .net, by Fax 1-909-930-5629, or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a .m . - 5:00 p .m . Pacific Time . Provide model number and description of the
problem and obtain confirmation number . At it's option Office Star Products will:
(a) Supply compatible components of current manufacture .
(b) Repair the customer's component .
It is the customer's responsibility to prepay freight on any components returned to the factory . Return freight on components
covered by warranty will be paid by Office Star Products .
© Office Star Products Juillet 2010
2787 / 27876
Matrix exeCutiVe CHair
OperatinG instruCtiOns
FEATURES
• pneuMatiC seat HeiGHt adJustMent
To raise seat remove pressure from seat and lift lever (1) up. To lower seat
height sit on chair and lift lever (1) up.
• Knee tilt tensiOn adJustMent
3
For individual comfort, this chair has been equipped with an adjustment
that will allow the user to change the tension of the tilting feature. Turn
knob (2) clockwise to increase tension and counter-clockwise to decrease
or ease the tension.
NOTE: Be careful not to loosen tilt adjustment knob completely.
2
• arM HeiGHt adJustMent
To adjust arm height, push button (3) in to allow the arms to move up or
down freely. Release the button (3) once the desired height is reached.
• Headrest adJustMent
4
To adjust the height of the headrest, first loosen the adjustment knob (4)
at the back of the headrest by turning it counterclockwise. Do not over
loosen the adjustment knob (4). Move the headrest to a desired height and
tighten the adjustment knob (4) by turning it clockwise.
WARNING
1 . Use this product only one person at a time .
2 . Do not use this chair unless all bolts screws and knobs are
securely tightened .
3 . Check that all bolts screws and knobs are tight every three
months or as needed .
4 . Do not overturn back tilt knob when decreasing tension .
5 . Dispose of packing material properly . Do not use plastic
cover as head covering . It may cause suffocation .
6 . Do not use chair as a stepladder .
7 . Use this chair for its intended purpose only .
8 . Use mild detergent only for cleaning .
27876