Advertisement
Configuring the Data Logger for the CT, using HOBOware Pro Software:
HOBOware Pro software provides a configuration file for the CT. The table below lists the recommended configuration values that
this file contains. For information on loading configuration files, refer to the software documentation.
Channel Name
Raw Value 1
Current
4mA
Current
0V
Note: The CT requires 12-30VDC @ 35mA excitation power for 0-5 volts output option, which can be supplied by the FlexSmart
Analog Module (Onset Part No. S-FS-CVIA) with H22; by the Analog Sensor Port with U30; and by power adapter (Onset Part
No. AC-SENS-1) with ZW, U12, and UX120-006M. For the 4-20mA option, 15-30VDC @ 35mA will need to be provided.
Distributed by MicroDAQ.com, Ltd.
Veris DC Current Transducer (CT) Connection Instructions
Raw Value 2
20mA
5V
Page 3 of 3
Scaled Value 1
Scaled Value 2
0
50 (or 100 or 200)
0
50 (or 100 or 200)
www.MicroDAQ.com
Scaled Units
Min. Warm-up Time
A
8-10 sec.
A
8-10 sec.
(603) 746-5524
Advertisement
