Table of Contents
Advertisement
Operating Instructions - Washer Dryer Lamona HJA 8703
Control Panel
A: Door open button
B: Door locked indicator light
C: Start button
D: Start Delay button
E: Prewash button
F: Cold wash button
G: Crease guard button
H: Spin speed control dial
I: Timer dial for drying programmes
L: "Time to end" indicator light
M: Buttons indicator light
N: Timer dial for wash programmes with OFF position
O: Dry indicator light
P: Detergent drawer
How to use the washing machine
1. Sort the laundry according to fabric type/care symbol, colours, size, and delicates.
2. Prepare the laundry – empty all pockets, close zips and hooks and eyes, loose belts should be tied together.
3. Open the door by using the button 'A' (as above)
4. Select laundry and put in the machine
5. Close the door
6. Put detergent in the compartment by pulling out the detergent drawer 'P'
7. Select programme
If you would like the drying cycle to begin automatically after washing, select the programme required using the
Drying Programme Selector dial 'I'. Otherwise it is possible to finish the wash and then decide on the drying
programme and load
Advertisement
Table of Contents
Related Manuals for Lamona HJA 8703
Summary of Contents for Lamona HJA 8703
- Page 1 Operating Instructions - Washer Dryer Lamona HJA 8703 Control Panel A: Door open button B: Door locked indicator light C: Start button D: Start Delay button E: Prewash button F: Cold wash button G: Crease guard button H: Spin speed control dial I: Timer dial for drying programmes L: “Time to end”...
- Page 2 8. Wait for the ‘STOP’ indicator light to flash 9. Press the ‘Start/Pause’ button ‘C’ 10. After a few seconds the appliance starts working At the end of the wash programme The indicator light ‘STOP’ will be on Wait for the door lock to be released (about 2 minutes after the programme has finished. The ‘Door Security’ indicator light will go out.
- Page 3 Table of Programmes Programme Weight Temp Charge Detergent Programme for Selector On Max Kg Resistant Fabrics • • – Cotton, linen Cotton, mixed • • resistant Cotton • • Resistant fabrics • • Mixed fabrics and • • synthetics • •...
- Page 4 Start/Pause button – C When a programme is selected wait for the ‘STOP’ indicator light to flash before pressing the ‘Start/Pause’ button. Press to start the selected cycle (according to the selected cycle one indicator light will go on) Note: When the ‘Start/Pause’ button has been pressed, the appliance can take a few seconds before it starts working.
- Page 5 Cold Wash Button By pressing this button it is possible to transform every programme into a cold washing one. Crease Guard button Press the button to select or deselect this function. The Crease Guard function minimizes creases as much as possible with a uniquely designed anti-crease system that is tailored to specific fabrics.
- Page 6 Automatic Programmes By selecting one of these 3 automatic programmes, the washer dryer will calculate the time needed for drying and the residual dampness required according to the load and drying type selected. After pressing the START button, one of the indicators will light to display the drying time remaining. Extra dry drying programme (recommended for towels, bathrobes and bulky loads) Cupboard dry drying programme Iron dry drying programme...
Need help?
Do you have a question about the HJA 8703 and is the answer not in the manual?
Questions and answers