Operating Procedures - Ribao CS-600B Operation Manual

CS-600B OPERATION MANUAL V1.1

Operating Procedures

·Turn on the power switch，the display shows the amount as right
picture, with decimal point.
·Press START/STOP to start, the machine
automatically
display mode, with decimal point. After
start, the motor rotates and counting
starts.
·In Single channel modes, press
key to select different channels. In
Amount display modes,
are void.
·In single channel
START/STOP key to return to quantity display and motor rotates and
starts to count.
·Press VAL key to switch between amount
and quantity.
Data clearance:
· In single channel modes, press CLR
to clear the data of this channel only;
·In total mode, press CLR key to clear
all the data
enters into amount
、
modes,
Page 7 of 15
、
keys
press