Connecting To A Tv - Zenith DVT312 Installation And Operating Manual

Connections (Continued)
TV Connections
Make one of the following connections, depending on
the capabilities of your existing equipment.
ips
Depending on your TV and other equipment you wish
to connect, there are two ways you could connect the
DVD/CD receiver. Use one of the connections
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
– Make sure the DVD/CD receiver is connected directly
to the TV. Select the correct AV input on your TV.
– Do not connect your DVD/CD receiver to TV via your
VCR. The DVD image could be distorted by the copy
protection system.
TV Connections Panel
S
R R L L
Video Connection
Connect the MONITOR OUT jack on the DVD/CD
receiver to the VIDEO IN jack on the TV using the video
cable (V).
S-Video Connection
Connect the S-VIDEO OUT jack on the DVD/CD receiv-
er to the S-VIDEO IN jack on the TV using an S-Video
cable [not supplied] (S).
S-VIDEO VIDEO
AUDIO INPUT
INPUT INPUT
L R L
V
300
otes
The S-VIDEO OUT jack will only output a signal
when the function mode is set for CD/DVD.
Before you connect the DVD/CD receiver to your TV,
be sure to turn off the power and unplug both units
from the wall power outlet before making any
connections.
11