Function Status Indicators - Zenith E44W48LCD Operating Manual

Function Status Indicators

Lamp indicator, operation indicator, and temperature indicator located below the front panel controls,
reveal the operating status of the LCD projection TV.
Operation Indicator
Lamp Indicator
Temperature Indicator
P A G E 6
Operation Indicator
Lamp Indicator
Off Power cord is not connected.
Red Power Cord is connected, TV is in standby mode.
Green
Orange (flashing) Preparing operation in standby mode.
Orange Projection lamp is reaching the end of its life and needs to
be replaced with a new lamp. Contact your service center.
Red (flashing)
authorized service center.
Green (flashing)
Orange The projection TV is overheating. Check the blocked vents of
the projection TV and the accumulated dust in the dust filter.
Red The projection TV shut down due to overheating.
Red (flashing)
your service center.
Temperature Indicator
TV turns on.
There is a problem with the lamp or around it. Contact an
The lamp cover is not closed.
The projection TV shut down, check the cooling fan. Contact
206-04006