Vcr Connections - Zenith E44W48LCD Operating Manual

VCR Connections

Locate the Antenna jack on the
1
back of your TV. Connect this to
RF out jack on the back of your
VCR.
Or, find the composite video and
audio jacks on the back of your
VCR, and connect them following
the instructions provided with
your equipment.
You may connect either the com-
posite video or the S-Video cables
to your TV. (Do not connect both
the composite and the S-Video
cables. In the event that you con-
nect both composite and the S-
Video cables, only the S-Video will
work.)
To hear stereo sound from cable or your VCR,
you will need to connect A/V cables as well as
the wire that runs from the VCR to your TV.
If you want to receive your signals on Channel
3 or 4, locate the Out to TV jack on your VCR.
Connect a cable from the Out to TV jack to the
Antenna In jack on the back of your TV.
After connecting external equipment to the TV,
don't display a still picture for a long time on
the screen. Doing so may damage the TV
screen.
206-04006
Cable TV
Wall Jack Panel
Round Wire
(75 ohm)
RF Coaxial Wire
(75 ohm)
Back AV Panel
Output In
Switch
3 4
Out
S-Video
Audio Video
R
L
VCR
Antenna
S-VIDEO
MONITOR VIDEO
OUT INPUT 2
MONO
A/V cables
not included
with TV
ANT IN
+75
VIDEO
INPUT 1
VIDEO
(L)
AUDIO
(R)
P A G E 1 1