Tuning Stations Manually; Tuning Stations Automatically; Mute - Zenith XBS341 Installation And Operating Manual

Radio Operation (Continued)

Tuning Stations Manually

Press FM/AM on the remote control or on the
1 1
front panel until the frequency band appears on
the display and TV screen.
Use FM/AM on the remote control or on the
2 2
front panel to select the desired band.
Use 4 4 TUNING 3 3 on the front panel or press
3 3
1 1 and 2 2 on the remote control to tune in the
desired station.
For your reference
FM Stereo
Press MONO/STEREO repeatedly on the front panel
until "ST" appears in the display.
Weak FM stations
Press MONO/STEREO on the front panel until the "ST"
word disappears from the display.
Background noise will be reduced but the signal repro-
duced will be mono.
To restore stereo reception, press MONO/STEREO on
the front to select STEREO.
To turn the radio off
Press POWER to turn the DVD+Hi-Fi VCR off or select
another function mode (CD/DVD, VCR, LINE 1 or
LINE 2).
38

Tuning Stations Automatically

Hold down 4 TUNING 3 on the front panel or hold
down 1 and 2 on the remote control for 1 or 2
seconds, and the next station is searched for automati-
cally.
ote
The search may not tune in or stop at a station with a
very weak signal.

Mute

Press MUTE to remove the sound.
You can mute your unit in order, for example, to answer
the telephone, "MUTE" indicator flashes in the display.
Press MUTE again to restore sound.