Tuning Stations Manually; Tuning Stations Automatically; Mute; Labeling Stations - Zenith XBS448 Installation And Operating Manual, Warranty

Radio Operation (Continued)

Tuning Stations Manually

1 1
Press FM/AM on the remote control or on the
front panel until the frequency band appears on
the display and TV screen.
2 2
Use FM/AM on the remote control or on the
front panel to select the desired band.
3 3
Use 4 4 TUNING 3 3 on the front panel or press
1 1 and 2 2 on the remote control to tune in the
desired station.
For your reference
To turn the radio off
Press POWER to turn the DVD+Hi-Fi VCR off or select
another function mode (CD/DVD, VCR, LINE 1 or
LINE 2).

Tuning Stations Automatically

Hold down 4 TUNING 3 on the front panel for 1 or 2
seconds, and the next station is searched for automati-
cally.
ote
The search may not tune in or stop at a station with a
very weak signal.

Mute

Press MUTE to remove the sound.
You can mute your unit in order, for example, to answer
the telephone, "MUTE" indicator flashes in the display.
Press MUTE again to restore sound.
40

Labeling Stations

You can enter a name of up to 5 characters for preset
stations. The names (for example, "ABCD") appears in
the system's Display window when a station is selected.
Note that no more than one name can be entered for
each preset station.
1
Press 2 to move to the station name column.
- - - - - - - RADIO - - - - - - - 6/10
FM 87 . 5MHz
FM 108 . 0MHz
FM 90 . 0MHz
FM 106 . 0MHz
FM 98 . 0MHz
FM/AM
MEMORY/CLEAR
2
Use the 3 3 /4 4 buttons to select the character then
use the 1 1 /2 2 buttons to shift to the next or previ-
ous character.
3
Press ENTER to confirm the station name.
4
Press ENTER on the remote control.
The station name is stored.
TUNING