Important Safety Information; Assembly Precautions; Use Precautions - Harbor Freight Tools 60723 Owner's Manual & Safety Instructions

Safety ......................................................... 5
Specifications ............................................. 4
Assembly .................................................... 5

IMPORTANT SAFETY INFORMATION

Assembly Precautions

1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.

Use Precautions

1. This product is not a toy. Do not allow
children to play with or near this item.
2. Setup and use indoors only. Keep dry.
3. Do not overtighten workpiece; damage
to workpiece may occur. Be careful not
to pinch fingers when working
4. Locate Workbench on a flat, level, solid surface
that is capable of supporting the weight of
the workpiece, Workbench and tools.
5. Use as intended only.
6. Replace bulb only with same bulb size and rating.
Page 2
Table of Contents
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
Indicates a hazardous situation which, if not avoided,
Indicates a hazardous situation which, if not avoided,
Addresses practices not related to personal injury.
For technical questions, please call 1-888-866-5797.
Maintenance ............................................... 8
Parts List and Diagram .............................. 10
Warranty .................................................... 12
will result in death or serious injury.
could result in death or serious injury.
could result in minor or moderate injury.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
7. Inspect before every use; do not use
if parts are loose or damaged.
8. Do not exceed listed weight capacity, evenly
distributed Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
9. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
10. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
60723