Parameters For The Sse Function - ABB FPTC-01 User Manual

54 Parameter settings
Index Name
I/O settings
SAFEIO.36 DI X113:4 diag
pulse on/off
SAFEIO.40 DI X114:4 diag
pulse on/off
1) The value does not have an effect on the SMT function, but other safety
functions in the FSO module can require a certain value.
2) The safety data is based on the assumption that this diagnostic measure
for the wiring is active (On). If pulsing is disabled, you must consider other
measures to ensure sufficient diagnostic coverage of the wiring failures.
￭

Parameters for the SSE function

These parameters are related to the Safe stop emergency (SSE)
function of the FSO module. The safety functions described in this
Example Description
value
Sets the diagnostic pulse of digital input
On 2)
X113:4 on or off.
On: The input monitors that it receives
test pulses.
Off: The input does not monitor for test
pulses.
Sets the diagnostic pulse of digital input
2)
On
X114:4 on or off.
On: The input monitors that it receives
test pulses.
Off: The input does not monitor for test
pulses.
Note: In a non-redundant system, you
can use a one-channel input (for ex-
ample, DI X113:4). In this case, this
parameter has no effect.