Page 2
Veiligheidsinformatie Ter waarborging van veilig gebruik en service van de stroomtang, volg deze instructies. Nalaten van bestuderen van de waarschuwingen kan leiden tot ernstige verwondingen of de dood. - Vermijd het werken alleen, zodat waar noding assistentie verleend kan worden. - Maak geen gebruik van de stroomtang (of meetsnoeren) wanneer deze beschadigd lijken.
Aan/Uit Automatische uitschakeling 30min Automatische uitschakeling uitschakelen : Druk op de toetsen (behalve op de Hold- knop), terwijl de schakelaar uit de Off-positie gedraaid wordt. AC V / DC V...
Page 5
ACA / DCA CAT.IV.600V met betrekking tot de bek van de de stroomtang t.o.v. de aarde Bescherm barrière voor veilig vasthouden Houdt de meter niet voorbij de barrière vast. I + (-I) = 0 Frequentie (Hz)
Page 6
Zero druk druk druk REL: De stroomtang onthoudt de getoonde waarde als offset na het indrukken van de Zero toets voor de 1 maal. De relatieve waarde verschijnt in het display. REL (knipperend) De stroomtang onthoudt de offset waarde. De actuele waarde verschijnt in het display. Zero toets langer dan 2 seconden indrukken om terug te keren naar de normale werking en de offset waarden te wissen.
Min / Max Hold druk druk druk druk MAX: De stroomtang onthoudt de maxi- mum en minimum waarden. De maximum waarde verschijnt in het display. MIN: De stroomtang onthoudt de maxi- mum en minimum waarden. De minimum waarde verschijnt in het display. MAX MIN (knipperend) De stroomtang onthoudt de maximum en minimum waarden.
Page 8
Piek Hold druk druk druk ≧3sec druk De stroomtang onthoudt de maxi- mum en minimum piek waarden. De maximum piek waarde verschijnt in het display. De stroomtang onthoudt de maxi- mum en minimum piek waarden. De mini- mum piek waarde verschijnt in het display. Peak toets langer dan 3 secon- CAL : den indrukken om de stroomtang zelf te...
Page 9
Specificaties 1-1 Algemene specificaties LCD scherm afbeelding cijfers : 3 ¾ cijfers grote afdruk LCD uitlezen. Display : 4000 digits Bemonstering : 1,5 keer/sec. Buiten bereik indicatie : “OL” wordt vertoond voor Ω–functies, laat de werkelijke waarde voor de A en de V-functie. Automatische uitschakeltijd : Ca.
Garantie Nieaf Instruments producten ondergaan strenge kwaliteitscontroles. Mochten er desondanks tijdens normaal gebruik, gebreken ontstaan dan verlenen wij een garantie van 12 maanden. Productie- of materiaalfouten worden kosteloos door ons verholpen, indien het instrument zonder invloed van buitenaf en ongeopend aan ons retour wordt gestuurd.
Safety Information To ensure safe operation and service of the Meter, follow these instructions. Failure to observe warnings can result in severe injury or death. - Avoid working alone so assistance can be rendered. - Do not use test leads or the Meter if they look damaged.
Off / On Auto Power Off 30min Auto Power Off disable : Press buttons (except Hold button) than switch the rotary knob to power on the Meter. AC V / DC V...
Page 19
AC A / DC A CAT.Ⅳ.600V with respect to earth for the jaw. Tactile Barrier for hand guard. Do not hold the meter across the Barrier I + (-I) = 0...
Page 20
Zero REL: Meter save the displayed offset value after press the ZERO button first time. The LCD is displaying the relative value. REL (flashing): Meter saved the offset value. Present value is displaying Normal : Press and hold ZERO for ≧2 sec to return to normal operation and cancel the offset value.
Min / Max Hold MAX: Meter is saving the maximum and minimum value. Maximum value is displayed. MIN: Meter is saving the maximum and minimum value. Minimum value is displayed. MAX MIN (flashing): Meter is saving the maximum and minimum values. Present value is displayed.
Page 22
Peak Hold : Meter is saving the peak maximum and minimum value. Peak maximum value is displayed. : Meter is saving the peak maximum and minimum value. Peak minimum value is displayed. CAL : Press and hold PEAK button≧3 sec to calibrate the Meter itself for accurate measurement.
Specifications 1-1 General Specifications LCD display digits : 3 3/4 digit large scale LCD readout. Display count : 4000 counts. Measuring rate : 1.5 times / sec. Overrange display : “OL” is displayed for “Ω” functions, shows the real value for “A” and “V”...
1-3 Electrical Specifications Accuracy is ±(% reading + number of digits) at 23°C ± 5°C < 80%RH. Temperature coefficient : 0.2 x (Specified accuracy) / °C, < 18°C, > 28°C . Voltage Function Range Accuracy 0~400.0Vrms ±(1.0%+ 5 dgt) *1 50Hz ~ 500Hz *2 400~750Vrms 0~400.0 V...
Page 25
Resistance & Continuity Function Range Accuracy 400.0Ω ±(1% + 3 dgt) Ω Overload protection : 600 Vrms Max. open circuit voltage : 3V Continuity check : Internal sounds activates if the resistance of the circuit under test is less than 30Ω approximately.
Frequency : Hz Range Resolution Accuracy 20~400Hz ±(0.1% + 2 dgt) Overload protection : 1000 Arms. Sensitivity : 3 Arms for ACA (A )(>400Hz Unspecified) Peak Hold : ± (3% + 15dgt) *>600Vpeak Unspecified. *>600Apeak Unspecified. Min/Max Hold : add ± 15 dgt to accuracy for ACA / DCA. * Automatically switch to the low resolution range at Peak Hold and MIN MAX Hold.
Warranty Nieaf Instruments are subject to strict quality control. However, should the instrument function improperly during normal use, you are protected by our 12 months warranty. We will repair or replace free of charge any defects in workmanship material, provided the instrument is returned unopened and unhampered with.