Forecast" Mode - VOLTCRAFT SEM4500 Operating Instructions Manual

9. "FORECAST" mode

"FORECAST" mode is intended to produce a forecast of energy consumption,
costs and CO values on the basis of the saved measured data. For a consump-
2
tion forecast, a period of time can be selected from one day, one week, one month
or one year. For example, you can estimate what operation of an electrical load
will cost.
In order for a consumption forecast to be possible, measured data of a
previously monitored load must be available.
• To switch between "CURRENT" mode and
"FORECAST" mode, press and hold the
button (4) for 3 seconds (see also Chapter 8.
a).
• If "FORECAST" mode is active for the con-
sumption forecast,
the display.
• Briefly press the
to switch between the different time periods for
the consumption forecast:
- "DAY": Time period = 1 day
- "WEEK": Time period = 1 week
- "MONTH": Time period = 1 month
- "YEAR": Time period = 1 year
• When the symbols ("LOW STANDBY POWER
LEVEL") and
power consumption of the connected device is
below the low standby limit ("LOW STANDBY
POWER LEVEL", see Chapter 8. f).
60
appears on
button (3) several times
appear in the display: The