E) Setting Electricity Tariff 1 And 2 - VOLTCRAFT SEM4500 Operating Instructions Manual

e) Setting electricity tariff 1 and 2

Two different electricity tariffs can be set for cost calculation (e.g. for
day/night-time electricity). If you only have one electricity tariff, set the
same price for both tariffs and leave the start time at "00:00:00".
• If you have set the 12h/24h format and the time (see Chapter 8. d) before set-
ting the electricity tariff, you can proceed directly to the next step.
Otherwise, setup mode must be started, see Chapter 8. c). Press the
button (7) to go to setting of the first electricity tariff, see the next step.
• Briefly pressing the
successively between the currency, electric-
ity price input and start time settings for both
electricity tariffs.
Special times for switching between day-time
and night-time electricity (weekends, public
holidays) cannot be taken into account.
• Change the respective flashing value with the
button (6) or
• If no indicator is flashing, you can jump to the
next setting by briefly pressing the
button or exit the setup menu by briefly press-
ing the button (2).
button (3) switches
button (7).
(7)
53