End Of Programme; Drying 3 Kg Of Cotton - Zanussi ZWD 1682 W Instruction Booklet

14. End of the programme
The machine stops automatically, the "Start/Pause"
button light goes out and the display shows a flashing
zero.
If the Rinse Hold option has been selected, the
light remains lit and the door is locked to indicate that
the water must be emptied out before opening the door.
The display shows a blinking zero.
To complete the cycle, choose one of the following
options:
•
Select programme "Drain" and depress the
"Start/Pause" button :
The water is emptied out without spinning.
•
Select the programme "Spin" or "Gentle Spin" :
Select the spin speed by means of the relevant button
and then depress the "Start/Pause" button.
After emptying, the machine performs the spin cycle
at the speed previously selected.
Attention!
Before selecting programme "Drain", Spin" or "Gentle
Spin", the selector dial has to be positioned on Off
(cancelling).
When the programme has been completed, a flashing
zero appears on the display and it will be possible to
open the door.
Turn the programme selector dial to "Off" position to
switch the machine off.
Remove the laundry from the drum and carefully check
that the drum is empty so as to avoid any forgotten
items being damaged in a subsequent wash (e.g.
shrinking) or their colour running into a load of whites.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.

DRYING 3 KG OF COTTON

You have for example just machine-washed and spun at
1600 rpm 6 kg of laundry.
They are cotton fabrics of medium weight which you
want to iron as soon as they are dry.
Remove the laundry from the appliance and divide the
items to obtain two loads of approx. 3 kg each.
The water tap must be open and the drain hose
must be positioned in the sink or connected to the
drain pipe.
1. Load the laundry.
2. Turn the programme selector dial to the drying
programme "Cottons Dry"
3. If you wish to carry out the electronic drying,
depress "Auto Dry" button until the light "Iron
Dry" illuminates.
If you want a timed drying, depress the "Drying Time"
button until the time you want appears on the display.
12