D-Link DSL-2750E Technical Support Setup Procedure page 9

-9-
Step 3: You are now at the DSL-2750E web interface. Click on "Advanced>3G Configuration".
3G Connection:
The USB Port on DSL-2750E supports compatible 3G dongle connection that can do fail-over when
both ADSL and Ethernet WAN connection is down.
Note:
1. 3G will only trigger to dial when both ADSL & Ethernet WAN is down. Even ADSL is down,
3G will not trigger as long as Ethernet WAN is still on.
2. Please download the latest 3G Dongle Compatibility List from www.dlink.com.sg
1. Plug in the 3G dongle into the USB port of DSL-2750E.
2. Please check that the '3G Status' is shown as 'Ready'.
3. Click on "Add" button.
FAQ : How to Configure 3G Fail-over on DSL-2750E