Labels - Mercedes-Benz Metris BM 447 Body & Equipment Manualline

3.3

Labels

The following OEM compliance labels are attached at
the positions shown in the illustrations.
a WARNING
• Removal of these labels is prohibited.
The labels shown here are not intended for certifica-
tion purposes, they simply illustrate the corresponding
position. Please consult the website of the NHTSA for
information on vehicle labeling requirements
www.nhtsa.gov
www.tc.gc.ca
and the website of the EPA
www.epa.gov
1. VIN label
2. Information on safety compliance
3. Identification plate with notice/logo indicating con-
formity with safety standards
4. Airbag warning notice
5. Tire and rim certification label
6. Vehicle Emission Control Information (VECI) certifi-
cation label
7. QR code for rescue information
Mercedes-Benz Body & Equipment Guideline for Metris - BM 447, Version November 27, 2015.
!
Please observe the revision notes compared to 09/18/2015 ! Only print out complete sections of the current version!
3 Product information
1. VIN label
VIN (example)
2. Position of identification plate
1 Identification plate on B-pillar on driver side
3.3 Labels
28