Chapter 4
C H A P T E R
DECADE Elite FW upgrade
Software installation
In order to be able to run Elite Dialogue a PC with Microsoft Windows OS
7 or higher is required and 2 free USB ports (1 USB port only in case the
free version is used to upload FW).
To install the software follow the procedure below:
Besides the Dialogue PC software a flash file containing the latest update
of the DECADE Elite/Lite embedded software is necessary. Such a flash
file has the following file name: DECADE_Elite_xxxx.anl.
Always consult Antec when upgrading a DECADE Elite detector.
Send an e-mail to:
mation and the flash file containing the latest update of the embed-
ded software. Please include the serial number of the DECADE Elite
detector which you want to upgrade in the e-mail.
Store the obtained flash file (*.anl) in the following directory:
C:\Users\xxxxx\Documents\Dialogue Elite\Templates
DECADE Elite FW upgrade
4
•
Download the latest version of DECADE Elite from the following
location:
http://www.myantec.com/detectors-and-analyzers/soft-
ware/elite-dialogue.
•
De-install previous versions of Dialogue before attempting an
installation.
•
Unzip the downloaded file and start the executable
EliteDialogueSetupxxxxx.exe.
•
Follow the installation instructions on the PC screen carefully.
The program will by default be installed in the directory:
C:\Program Files (x86)\Antec\Elite Dialogue\
After installation a new application group named "Antec" will ap-
pear in the Windows Start Menu containing a link named "Elite Di-
alogue".
•
In Windows regional settings the decimal separator should be a
dot ".", and the digit grouping symbol a comma ",".
support@myantec.com
to obtain upgrade infor-
23