Antec DECADE Elite Service Manual page 20

20 175.0020 - DECADE Elite service manual - rev 03
USB cable for updates of the embedded software (Firmware) an A-B USB
cable is required, this cable (pn 250.0175) is shipped with the instrument.
IO connection set Testing outputs is done using the factory supplied con-
nector cable and screw terminal PCB: DECADE Elite I/O conn. Board (p/n
250.0131B) and DECADE Elite I/O cable 25M-25M, 1.8m (p/n 250.0131C).
Elite Dialogue software: download the latest version from:
http://www.myantec.com/detectors-and-analyzers/software/elite-dialogue.
The free version of Elite Dialogue can be used for instrument control and
firmware updates. To be able to run an OQ, PQ and automated calibration
scripts an Elite Dialogue USB license key (pn 171.9012) is required. Elite
Dialogue is backward compatible: 'old' Dialogue license dongles can be
used with the new Elite Dialogue software.
Computer requirements In order to be able to run Elite Dialogue a PC
with Microsoft Windows OS 7 or higher is required with 2 free USB ports
and 1 free LAN port. Microsoft Excel (2003 or newer) is required for saving
data to Excel and using the calibration scripts. In Windows regional set-
tings the decimal separator should be a dot ".", and the digit grouping sym-
bol a comma ",".
Dialogue Elite uses the Elite USB port only for Firmware updates, in all
other cases (calibration scripts, PQ/OQ measurements) the LAN port is
used.