Meyer Sound LEOPARD Operating Instructions Manual page 12

Compact linear line array loudspeaker

Table of Contents

CHAPTER 1: INTRODUCTION

NOTE:

For Native mode to work properly, the

source signal must be correctly configured

with the appropriate gain structure.

CAUTION:

Make sure that all cabling for

looped loudspeakers is wired correctly (Pin 1

to Pin 1, Pin 2 to Pin 2, and so forth) to prevent the

polarity from being reversed. If one or more loud-

speakers in a system have reversed polarity, fre-

quency response and coverage will be significantly

degraded.

Table of Contents

Need help?

Do you have a question about the LEOPARD and is the answer not in the manual?