Download Print this page

Yamaha Electone GX-1 Service Manual page 142

Hide thumbs Also See for Electone GX-1:

Advertisement

GX-1
(S/#
5030~
)
UPPER
With. this switch set at ''1'' and the panel 5 upper portamento lever
PORTAMENTO
at '3', when
the upper manual
C1 and C6 are pressed in turn, no
effect will beheardif the foot switch is at ''0''.
But once it is set to
"1"" the portamento effect will be heard.
The position of the panel
5 upper portamento knee lever tablet (''0'' or ''1') has no effect in
this case.
35. Over Tone Presets
When
any of the buttons
1-4 are pressed, the button
lamp
lights.
Pressing C button cancels the lit lamp.
*Buttons
1-3 call forth
the
preset controls
on the pull-out board.
When
any of the buttons is lit, the panel 1 over tone is cancelled,
and the over tones are then controlled by the setting of
the appro-
priate board levers.
*Button 4 controls a preset configuration which is factory set accord-
ing to the following chart:
UI
Ul
LI
LO
Pl
PU
36. Over Tone Switch
Center Blank
*|f any over tone switch lever on panel 1 or panel 8 is set at a position
other than a click stop, it has the same effect as being set at stop "'2"'.
37. Solo Keys and
Portamento Strip
*Both sections use the same tone generators.
*|f both are pressed at once, portamento takes precedence over solo.
*The pitch at the same
location on both sections should
be within
+75 cent.
—i2i

Advertisement

loading