Advertisement
User Warnings and Cautions
The installation and service instructions in this manual are for use by qualified
personnel only.
To avoid electric shock, do not perform any servicing other than that contained in
the operating instructions unless you are qualified to do so. Refer all servicing to
qualified personnel
This instrument has an auto-ranging line voltage input. Ensure the power voltage is
within the specified range of 100-240VAC. The ~ symbol, if used, indicates an
alternating current supply.
This symbol, wherever it appears, alerts you to the presence of uninsulated,
dangerous voltage inside the enclosure – voltage which may be sufficient to
constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and
maintenance instructions. Read the manual.
CAUTION: HAZARDOUS VOLTAGES
The instrument power supply incorporates an internal fuse. Hazardous voltages
may still be present on some of the primary parts even when the fuse has blown. If
fuse replacement is required, replace fuse only with same type and value for
continued protection against fire.
WARNING:
The product's power cord is the primary disconnect device. The socket outlet should
be located near the device and easily accessible. The unit should not be located such
that access to the power cord is impaired. If the unit is incorporated into an
equipment rack, an easily accessible safety disconnect device should be included in
the rack design.
To reduce the risk of electrical shock, do not expose this product to rain or moisture.
This unit is for indoor use only.
This equipment requires the free flow of air for adequate cooling. Do not block the
ventilation openings on the rear and sides of the unit. Failure to allow proper
ventilation could damage the unit or create a fire hazard.
17
Advertisement
