Advertisement
Upmixing
Click on the Upmixing dropdown menu (12B).
Choose the program input format using the Input Format dropdown menu (12C).
By default, it is set to "Auto Detect" so that incoming content that already matches
the desired output format will pass through unaltered, while 2- or 3-channel content
will be automatically upmixed. Unless the channel format of your incoming content
is always the same, we strongly recommend leaving this control set to "Auto Detect"
to avoid unpredictable and unexpected results.
Use the Output Format dropdown menu (12D) to choose the desired channel
format on the output.
If you change any upmixing values and want to save those changes to a custom
preset, click on the Save As button (12E). This configuration can then be recalled by
clicking on the Preset dropdown menu (12A).
Figure 12: Upmixing
13
Advertisement
