Part 5
PROGRAMMING MODE -
1 1
Collect information data : CLCt(display)
The washer collects the usage data so that the owner can check various information like number of various cycles used,
how many times card or coins used, etc.
Entering the collect mode
Data Name
1.Entering the programming mode.
Entering
2.Whites
the collect
3.Colors(+), Delicates(-)
mode
4.Start
5.Colors(+), Delicates(-)
6.Start
7. Whites
❖ Check the collect information reference to the follow lists. The Lists are displayed by abbreviations.
4 4
Button
Display
xxxx
xxxx
CLCt
Collect Mode
Description
Insert service card(card type), open the service door(coin type).
Press the whites button until "tESt" appears in the display.
Press the Colors(+),Delicates(-) button until "CLCt" appears in
the display.
Enter the Collect information data.
Move to each data list that you want to check by pressing with
Colors (+) or Delicates (-) button.
Display the value of selected data list
Move to upper level or Comes back to Idle State