LG GCW1069QD Owner's Manual page 24

Part 5 PROGRAMMING MODE -
1 1 1 1 - - 2 2
Clear escrow setup - Applied only to coin type
If the total of the coins inserted is greater than the setup price, there are two choices.
1. If CLEE Enab
2. If CLEE Disb
Entering set up mode.
You will see LqC1
2 4
is selected, clear the cycle and display the balance.
is selected, clear the cycle and do not display the balance.
Press the WHITES button.
Press the COLORS or the DELICATES
button until appears in the display.
Press the START button.
Press the COLORS or the DELICATES
button until appears in the display.
Press the START button.
Display
.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press COLORS or DELICATES button and then select
or
Disable
Enable
Press the START button.
The machine sets up the clear escrow application
,then advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Close the service door.
• Card type - Pull the service card.
Setup Mode
Button
.
Display
One or the other will
display.