LG GCW1069QD Owner's Manual page 31

Part 5 PROGRAMMING MODE -
1 1 4 4
Special price ending time setup
Entering set up mode.
You will see LqC1
Note
rPdC (regular priced dryer cycle time) is not available in washer.
SPdC (special priced dryer cycle time) is not available in washer.
Note
When setting up a special price period, the ending time must be later than the beginning time.
Press the WHITES button.
Press the COLORS or the DELICATES
button until appears in the display.
Press the START button.
Press the COLORS or the DELICATES
button until appears in the display.
Press the START button.
Display previous Special Price ending time.
Press COLORS(+) or DELICATES(-) button to select time
between 0 and 23.
Press the START button.
The machine sets up the special price ending time, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Close the service door.
• Card type - Pull the service card.
Setup Mode
Button Display
3 1