Calibration; Specifications And Spare Parts - Auto Test AutoLight User Manual

For other problems, contact AutoTest Products. Repairs should only be carried out by
AutoTest Products Pty Ltd or by an Authorised Service Centre in order to ensure the
product retains its calibration.

6. CALIBRATION

AutoLight will require calibration at intervals of two years (one year for UK) or as required
by your local Authority. Calibration can only be carried out by AutoTest Products Pty Ltd or
by an Authorised Service Centre.

7. SPECIFICATIONS AND SPARE PARTS

Standards: Conforms with ISO 3538
Battery 2 x MN1604 batteries (9 Volt) - Duracell type only
Light Source Output 2856
Lamp Voltage Stabilised within + 0.1%
Sensor Spectral sensitivity conforming to photopic curve V(λ) of relative illuminous
efficiency of the C.I.E. 1931 standard observer for photopic vision
LED readout 0 - 100%, linear from 20 - 100%, ± 3%
Display
The following spare parts can be obtained from AutoTest Products:
- Calibrated glass sample
- PDF Manual
- Batteries (2 x 9v)
- Protective Bag
The replacement of any other components must be carried out by AutoTest Products or an
Authorised AutoTest Products Service Centre.
AutoLight User Manual Version 3 – July 2020
o o
K + 50 K, conforming to C.I.E. standard illuminant A
Page 3