PASCO PS-3553 Instruction Sheet

1.
2.
4.
Included Equipment
1. Tripod
2. Rod
3. Vane
4. Pivot Pin
Additional Equipment Needed
Wireless Weather Sensor
Introduction
The PS-3553 Wireless Weather Accessories includes
hardware used to mount the PS-3209 (Wireless Weather
Plus GPS Sensor) to provide a means for the sensor to
follow the wind direction while making measurements.
Set-up
1. Attach the Pivot Pin to the Tripod by
screwing the Pin onto the 14-20 threaded
rod on the Tripod.
2. Screw the Rod into the PS-3209 Sensor as
shown and attach the Vane.
800-772-8700
Wireless Weather Accessories
3.
PS-3209
PS-3553
3. Slip the PS-3209 Sensor onto the Pivot pin
hole in the bottom of sensor. Insure Sensor
assembly rotates freely.
Wireless Weather Accessories
Shown with PS-3209 Sensor (not included)
Instruction sheet
012-15817A
www.pasco.com