PASCO EM-3536 Instruction Manual

Modular Circuits for Essential Physics
Included Items
Item
Battery Module
Corner Module
Light Bulb Module
Potentiometer Module
SPDT Switch Module
Spring Module
Tee Module
33 ohm Resistor Module
EM-3534 Current Sensor Module
1000 ohm Resistor
100 microfarad Capacitor
Diode
Magnet (0.5 by 0.25 inch)
Jumper Clips
Storage Case and Lid
Recommended Items
Shrouded Alligator Test Leads PS-3544, PASCO Software (see www.pasco.com).
Introduction
The PASCO Modular Circuits for Essential Physics kit comes in a Gratnells ™ plastic storage case with
three layers. Each layer has a molded plastic piece for storing the components. Modules fit on each layer,
and loose components such as the Jumper Clips, Resistors, Capacitors, Magnets, Diode, and Compass fit
in trays in the middle of each layer. The plastic layers are attached to specially designed pieces of foam
that include cutout areas to fit over the taller modules. Taller modules are stored on the middle and bottom
layers. This instruction manual shows how to store the modules on each of the layers.
EM-3536
Qty Item
2 0.22 farad Capacitor Module
4 LED Module
3 Motor Module
1 10 ohm Resistor Module
1 SPST Switch Module
1 Straight Module
2 1000 Turn Coil Module
1 100 ohm Resistor Module
1 PS-3211 Wireless Voltage Sensor
2 330 ohm Resistor
1 330 microfarad Capacitor
1 Battery, AA cell
8 Plotting Compass
45 Alligator Clip Jumper Wire
1
1
I n s t r u c t i o n M a n u a l
0 1 2 - 1 5 3 6 0 A
*012-15359*
Qty
1
1
1
1
1
5
1
1
1
2
1
2
1
1