Zanussi ZUD 9124 Instruction Booklet page 20

6. If necessary, pads are supplied for the rear feet to
make sliding the appliance in and out of the recess
easier. To fit the pads, press them onto the rear
feet.
If required, the dimensions of these pads can be
reduced by breaking them where marked.
2
B
3
N.B. The joint cover (B) is to be assembled after hav-
ing installed the appliance in the recess.
7. Screw appliance into place and retain the cabinet
with screws through the securing brackets into the
worktop or adjacent woodwork as necessary.
1
20
II52
2/a
4
5
115