Flash Memory - ohmex SONARMITE Manual

SonarMite BTx/SPx v5.02 © 2016 Lymtech
APPENDIX
SonarMite Settings
The SonarMite when connected via Bluetooth to a serial communications program
such as Hyperterminal has a basic set of simple single character commands used to set
the basic parameters of the instrument.

Flash Memory

The instrument contains an area of configuration data held within its semi-permanent
FLASH memory area. On running the instrument this data is copied into the current
working RAM area of the processor. Pressing any of the configuration command
characters will only change the current active states enabling the user to sample
output unil the „Save‟ command is used to store the current settings and make them
the new defaults when the system is rebooted.
Page 21