ohmex SONARMITE Manual page 26

☺
(^I)d
Toggle the ID number of the instrument. This function is intended for use in multiple
transducer systems running in polled mode.
☺
(^U)p
Increase the sound velocity setting for dense cold water (only available in the SYS>
output mode).
This is a dangerous function and will change calibration values if saved
☺
(^D)own
Decrease the sound velocity setting for lighter fresh/warm water (only available in the
SYS> output mode).
This is a dangerous function and will change calibration values if saved
☺
(^C)lear
Reset output to format 0.
☺
(^B)
Set output to new format 8.
SonarMite BTx/SPx v5.02 © 2016 Lymtech
(used by external
(used by external
Page 26
programs).
programs).