X-cam A22-2H User Manual page 3

2. Gimbal Control
        The Gimbal provides 2 ways to control the TILT, Linear Mode or Tracking Mode
Linear Mode: Push the TILT stick to high or low for moving the camera mount to up or down until the stick back to midpoint
Tracking Mode: Push the TILT stick to high or low, the camera mount will follow the stick position.
      Push speed: Setup the camera mount moving speed, high value set high speed; low value set low speed.

3.
Sensor calibration



Auto Calibration
  The Gimbal will start the AUTO CALIBRATION function automatically  when
poweron,UsuallyitdoesnotneedtodoAUTOCALIBRATION.

Sensor Calibration
  IfthevideoimageisnothorizontalyoumayrunSENSORCALIBRATIONasbellow
steps：

1. Putalevelvialonthetopofthecamera
2. Makesurethecameraishorizontalinmanually
3. HoldthecameraandclickSENSORCALIBRATIONbutton