Makita SA7000 Technical Information page 6

W
iring diagram
[2] Wiring in Handle
Fig. D-3
Before setting Switch in place, fix Lead wires
with Lead wire holders under switch as illustrated below.
Lead wire holders
Lead wires (white)
of Noise suppressor*
Field lead wire (red)
Field lead wire (white)
*If Noise suppressor is used
Noise suppressor
(if used)
Switch
Put Noise suppressor in this space if used.
Route two Field lead wires (red, white)
between the rib and the boss and between
the rib and the inside wall of Handle (L).
rib boss
P 6 / 6