Circuit Diagram - Makita SA7000 Technical Information

C
ircuit diagram
Fig. D-1
Color index of lead wires' sheath
Black
White
Red
Black or brown
Blue or white
W
iring diagram
[1] Wiring on Motor Housing
1) Route Lead wires (a), (b), (c), (d), (e), (f) through the openings (shaded portions),
and fix them with Lead wire holders. (Fig. D-2)
2) Then route them as illustrated below in Fig. D-2.
Note: Illustrated in Fig. D-2 is Motor housing viewed from the side of A.
Fig. D-2
Put Insulated connector
in this depressed portion
of Motor housing.
Insulated connector
that connects (a) and (c)
(d) Connecting lead wire (black)
of Brush holder
(e) Field lead wire (red)
(f) Field lead wire (black)
Noise
suppressor*
Switch
Lead wire
holders
Insulated
connector
Field
[Name plate side]
*Noise suppressor is not used
for some countries.
Be sure to place (b) under (a) when fixing
them with this Lead wire holder.
Fix (b) with this Lead wire holder only.
(a) Field lead wire (black)
(b) Field lead wire (white)
(c) Connecting lead wire (black)
of Brush holder
Insulated connector
that connects (d) and (f)
Put Insulated connector
in this depressed portion
of Motor housing.
P 5/ 6
Insulated
connector
Motor housing
[A]