As with every Tribest product, the Tribest MILL-1 Grain Mill’s rich features are the result of smart choices that were made to do one thing: Make Healthy Living Easy.
TABLE OF CONTENTS • Introduction........................3 • Important Safeguards.....................6 • Before First Use......................7 • Instructions........................8 • Parts & Features......................9 • Start-Up.........................10 • Cleaning........................12 • Troubleshooting........................13 • When you need service....................14 • Product Information.......................15...
Children must be under supervision to ensure that they do not play with the device. 10. Never immerse the device in water. *Tribest Grain Mills are equipped with an overcurrent circuit breaker that protects the motor from excessive current consumption (e. g. if debris jams the grindstones).
BEFORE FIRST USE Before you use the device for the first time, please first carefully read through the safety instructions and operating instructions. Only in this way you will be able to use all functions safely and reliably. Hold onto these operating instructions for future reference. Pass these operating instructions on to any subsequent user of the product.
Page 8
PARTS LIST Funnel lid Funnel Brass screws Adjusting lever Flour outlet On/Off Switch (Top) Fixed Grindstone Grinding Chamber (Bottom) Rotating Grindstone...
You can now return the funnel to its previous position and secure it with the brass screws. Milling Once connected to a power supply, your Tribest Grain Mill is ready for use. Place a bowl under the flour outlet and adjust the fineness (figure 5). Then fill the funnel with grain and turn on the mill.
Page 10
The different types of grain and other mill feed differ considerably with respect to their fat and fibre content, endosperms etc. Our mill feed table is based on this. Tribest Grain mills have undergone extensive testing and this table was compiled accordingly for your reference. However, the values provided are approximate and are dependant on the moisture content of the grain.
CLEANING A brush is integrated in the bottom rotating grindstone of your Tribest MILL-1 Grain Mill, which sweeps out the flour with every rotation, thereby automatically cleaning the mill. If you don’t intend to use your mill for a prolonged period of time, we recommend cleaning any leftover flour out of the grinder.
TROUBLESHOOTING In the unlikely event of a fault, you can rectify it easily: The motor doesn’t start: Is the mill connected to a power supply? Has the plug been properly connected with a socket? Solution: • Check both points and rectify the fault. The motor hums, but doesn’t start running: When turning off the unit, grain may have clogged between the grindstones and may have jammed them.
Page 13
OPENING THE GRINDER Attention! Turn off the mill with the On/Off switch and then disconnect the mains plug before opening the housing to prevent the unit from accidentally turning on – risk of injury! • Remove the four brass screws on the top of the mill housing (page 9, figure 1).
Page 14
1. We warrant to you, the end-user customer, who has properly registered for warranty upon purchasing a new Tribest ® MILL-1 Grain Mill that the new Tribest ® MILL-1 Grain Mill will be free from defects in materials and workmanship for a period of 3 years from the date of purchase.
WHEN YOU NEED SERVICE In the unlikely event that you require service on your Tribest MILL-1 Grain Mill, or if it fails to function properly within the warranty period during normal household operation, please contact the Tribest Warranty Service Center.
Need help?
Do you have a question about the MILL-1 and is the answer not in the manual?
Questions and answers