• Do not expose this product to open flames or use near fire.
• Do not use the product in a strong magnetic field.
• Use a clean, soft cloth to clean. Do not use any corrosive
cleaners/oils to clean.
• Do not attempt to repair the device or open the unit as this
will void the warranty.
NOTE: You cannot connect additional light strips to this
product.
NOTE: If desired, you can cut the light strip to shorter
lengths by cutting on the designated scissors marks.
However, IF THE PRODUCT HAS BEEN CUT IT
WILL NO LONGER BE WATER PROOF.
Specifications
• light strip length: 16.4ft (5m)
• cable length:
8ft (2.4m) to power supply + 1.5ft (.5m) to plug
• input: 12V 0.42A
• output: 12V 1A
• remote control: 1 x 3V battery, type CR2025