Aux Send Jacks; Stereo Aux Return Connectors; The Monitor Section Of The Ub1832Fx-Pro - Behringer EURORACK UB1622FX-PRO User Manual

EURORACK UB1622FX
Fig. 2.7: The AUX SEND controls of the main section!
The FX control determines the signal level for effects
processing, i.e. regulates the level to an external (or the inter-
nal) effects device.
UB1622FX-PRO and UB1832FX-PRO: On these consoles, this
function is performed by the AUX SEND 2 control (FX).
You can use the SOLO switch to separately monitor the aux
sends via the CONTROL ROOM/PHONES outputs and check
these with the level meters.
+
Fig. 2.8: Aux send jacks
The AUX SEND jack should be used when hooking up a monitor
power amp or active monitor speaker system. The relevant aux
path should be set pre-fader.
+
As already mentioned, the aux sends in the channels—if set
post-fader—can be used to connect to external effects devices.
The AUX SEND (FX) jack carries the master aux mix (from the
channel’s FX controls). You can connect this to an external
effects device to process the FX bus. The processed signal can
then be brought from the effects device back into the STEREO
AUX RETURN jacks.
8
/UB1832FX
-PRO -PRO
+
return for the effects mix (created using the post-fader aux
sends) by connecting the output of an external effects device. If
only the left jack is connected, the AUX RETURN is automatically
switched to mono.
+
used with unbalanced connectors. If you use an aux send for
monitoring, the associated unused stereo aux returns are
available for other line level signals (e.g. keyboards).
+
return (created using the channel FX sends). If these jacks are
already in use as additional inputs, you can route the effects
signal back into the console via a different channel. The advantage
of this is that you can now use that channel’s EQ on the effects
return signal.
+
+
models of this series is that it has a separate monitor output.
monitor mix from the channels and route it to the MON SEND
fader.
2. CONTROL ELEMENTS AND CONNECTORS
/UB2222FX /UB2442FX
-PRO
Fig. 2.9: The aux return connectors
The STEREO AUX RETURN 1 jacks generally serve as the
All stereo aux returns are balanced, but can of course also be
The STEREO AUX RETURN FX jacks accept the effects mix
One of the ways that the UB1832FX-PRO differs from the other
Fig. 2.10: Monitor output of the UB1832FX-PRO
The first aux send (MON) on this console is used to set up the
-PRO