Download Print this page

CDP KAZA DT 450 MTR Quick Start Manual

Mobile and fixed radar detector

Advertisement

Quick Links

MOBILE AND FIXED RADAR DETECTOR KAZA CDP DT 450 MTR
EUROPEAN MODEL – Factory settings for SPAIN
1. Introduction.
Thank you for purchasing the
Mobile and Fixed Radar Detector KAZA CDP DT 450
MTR.
The KAZA CDP DT 110+450 Radar Detector
uses the most advanced GPS technology and detector
antenna. It has been specifically designed and developed for the Spanish market, optimizing its
sensitivity to detect mobile radars; it works with a verified and efficient database to detect fixed
radar warnings, for the exclusive use of KAZA CDP DT 110 owners.
1

Advertisement

loading

Summary of Contents for CDP KAZA DT 450 MTR

  • Page 1 It has been specifically designed and developed for the Spanish market, optimizing its sensitivity to detect mobile radars; it works with a verified and efficient database to detect fixed radar warnings, for the exclusive use of KAZA CDP DT 110 owners.
  • Page 2 Do not use the KAZA CDP DT 110+450 unit to avoid speed limit controls, but rather to promote safer driving conditions. The device will remind you of the limits that should be complied with at all times, aiding you to avoid mistakes or blunders that may lead to accidents or speeding fines.
  • Page 3 KA bands in 34.3 and 35.5 Ghz and Multa Radar CD/CT. In Spain, KA band and Multa radar CD/CT are used for both fixed and mobile radars. In the KAZA CDP DT 450 MTR model, these bands are the factory setting in DT110 Options by default. See examples (photo 6).
  • Page 4 (Photo 6) RADARS NOT DETECTED BY ANY ANTI-RADAR UNIT. Autovelox mobiles that work with a laser in cross-section to the road. Approximately 2% of radars are of this type. They may be identified if you observe a car on the roadside with the glass window behind the driver lowered halfway.
  • Page 5 Laser On 5. Installation of the detector antenna with the supports supplied (optional). Contents of the detector antenna box (optional):  KAZA CDP DT 450 MTR antenna.  Cable 12V DC with fuse for antenna power.  Bag with supports and screws.
  • Page 6 Attach the black terminal to the battery’s Insert the cable terminals in the antenna negative end. terminals respecting the colors and moving the plastic case so they don't touch each other or make contact with any metallic part of the vehicle.
  • Page 7 You are approaching a radar source located behind a rise or curve. Since it is hidden, the signal will be detected weakly at first. Then it will appear with maximum intensity when you enter the field of vision of the radar. The detector antenna emits short alarms during brief seconds.
  • Page 8 7. False alarms of the detector antenna. The detector antenna of the KAZA is a microwaves receiver. To be able to detect the radars, this antenna must be very sensitive, since they emit at very low power. Due to the high sensitivity of the antenna, it might detect strong transmissions and give off false alarms.
  • Page 9 Storage temperature: -30º ~105º C IMPORTANT NOTE: CDP reserves the right to modify the user guide and product characteristics without previous warning. Also, some of the functions described in this guide may vary depending on the software version installed or the optional components...